Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in White Plains?
Spring replacement in White Plains typically costs $180 – $340 per spring, and most doors use two springs that are replaced as a matched pair, so a pair usually runs about $360 – $680. That estimate covers the springs and the labor to set them safely. The written estimate we give you sets the final price, and the estimate itself is free.
We handle torsion and extension springs on the brands White Plains homes actually have, including Clopay, Amarr, Wayne Dalton, Raynor and Craftsman doors. Springs are the most dangerous component in your garage door system, and we handle them right. Call (844) 484-7501 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- One spring: typically $180 – $340. A matched pair: roughly $360 – $680.
- Most two-spring doors should replace both at once, because the second spring is the same age and under the same load.
- Broken cables, worn rollers or a bent track found during the same visit add to the job, and we quote those before we start.
- Same-day service is often possible when you call in the morning. The estimate is free and sets the price.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually break down for a spring job in White Plains. These are typical estimated ranges for our market, not a menu of fixed prices, and the written estimate you receive is what you pay.
| Line item | Typical estimated range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Extension spring replacement (one spring) | $180 – $340 |
| Matched pair of springs | $360 – $680 |
| Spring repair (re-tensioning, hardware) alongside the replacement | Often included in the spring estimate |
| Cable repair, if a cable is frayed or snapped | $130 – $250 |
| Roller replacement, if rollers are worn or noisy | $110 – $220 |
| Track realignment, if the door is binding | $120 – $240 |
| Opener repair, if the opener was strained by the broken spring | $120 – $320 |
The spring itself is a modest part of the bill. Most of what you pay for is the skilled labor and the safety of the job: a wound torsion spring stores an enormous amount of energy, and setting one requires the right winding bars, the right technique, and someone who has done it many times. That’s why a general handyman quote and a specialist quote can land in different places: the specialist is pricing the risk and the brand-specific fit, not just a coil of steel.
What pushes a spring job toward the top of the range? Heavier doors, high-lift or unusual track setups, springs that are seized or rusted in place, and any related damage the broken spring caused on its way out. What keeps it near the bottom? A straightforward one-spring replacement on a standard door where everything else checks out. If you need the broader picture on the door as a whole, our garage door repair White Plains page covers the full range of repair work we take on.
What Affects Spring Replacement Pricing in White Plains
- One spring or a pair. Nearly every door here runs two springs, and when one breaks the other is the same age with the same cycles on it. Replacing both at once costs about twice the single-spring range, but it saves you a second service visit when the survivor fails a few months later. We’ll tell you honestly whether the second spring has life left.
- Torsion vs. extension. Torsion springs mount on a shaft above the door and extension springs run along the sides. Torsion is the more common setup on newer doors and the more involved job; both fall inside the same $180 – $340 per-spring range, but the parts and the time differ.
- Door weight and size. A wide double-car door carries heavier springs than a single-car door, and heavier springs cost more. Oversized or unusually tall doors can land toward the top of the range.
- The local climate’s wear and tear. White Plains sees real seasonal swing, from humid summer stretches to cold winters with plenty of freeze-thaw cycles. That cycle of expansion, contraction and moisture is hard on steel springs and the cables and rollers around them, and it’s a common reason springs in this area fatigue before their cycle count would suggest.
- Related damage found during the visit. A snapped spring often takes a cable with it or leaves the door sitting crooked on its track. We quote any cable, roller or track work before we touch it, so there are no surprises on the invoice.
- Opener strain. When a spring lets go, the opener keeps trying to lift a door it was never meant to lift alone. If the opener took a beating, opener repair runs $120 – $320, and we can diagnose LiftMaster, Chamberlain, Genie and Craftsman units on the same visit.
Signs You Need Spring Replacement, Not Just a Repair
A spring can sometimes be re-tensioned or its hardware replaced, but a broken or badly fatigued spring needs to be replaced. Here’s what points to replacement rather than a quick fix:
- A loud bang from the garage followed by a door that won’t lift. That’s usually a torsion spring snapping.
- A visible gap in the coil of a torsion spring, or a stretched, gaping extension spring on the side.
- The door feels extremely heavy when you try to lift it by hand, or the opener strains and stalls.
- The door lifts a few inches and stops, or goes up crooked and binds in the track.
- Visible rust, sagging, or a spring that’s clearly lost its tension.
Please don’t try to wind, unwind or remove a spring yourself. Springs are under extreme tension, and the wrong move can cause serious injury. This is a job for a trained technician with the proper tools. If you’re not sure whether it’s the spring or the opener, we can tell you on the phone and set up a visit. For the full scope of what a spring job involves, see our spring replacement page.
How to Save on Spring Replacement
There’s no coupon needed to keep a spring job reasonable, but a few habits help:
- Replace both springs together. A matched pair at roughly $360 – $680 beats paying for two separate single-spring visits when the second one fails. It’s the single biggest saver on this job.
- Fix the small stuff during the same visit. If rollers or cables are near the end of their life, having them handled alongside the springs usually beats a second trip later.
- Keep the door balanced and lubricated. A door that’s properly balanced and its springs, rollers and hinges kept clean and moving wears more evenly, which can stretch the time before the next replacement.
- Get a written estimate before work starts. That locks in the price and tells you exactly what’s included. Ours are free.
- Call when you first notice the symptoms. A door that’s straining or binding puts extra load on the springs. Catching a problem early is cheaper than waiting for the snap.
For a free estimate, call (844) 484-7501. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Brand-Specific Knowledge Matters on a Spring Job
Springs are sized to the door, and the door matters. Our technicians have up to 11 years of experience and work with the industry’s leading brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor. That brand-level familiarity means we’re not guessing at the right spring for your door or trial-and-error on the hardware around it. Brand-specific diagnostics, not generic guesswork, is what keeps a spring replacement to one visit.
From the opener to the panel to the hardware, one call covers it all. If the spring job turns up an opener issue, a damaged panel or a track that needs realignment, we handle it in the same visit rather than sending you to a second company. And when a door won’t wait, our emergency garage door service is a real option, not a promise. Call (844) 484-7501. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Spring Replacement Cost
How much does it cost to replace garage door springs in White Plains?
Expect about $180 – $340 per spring in White Plains, and roughly $360 – $680 for the matched pair most two-spring doors need. The written estimate sets the final price, and the estimate is free. Call (844) 484-7501 for an exact quote.
Is it cheaper to replace one spring or both?
Replacing both at once costs about twice the single-spring range, but it’s usually the better value: when one spring breaks, the other is the same age and often fails soon after, and a pair replacement avoids a second service visit. Call (844) 484-7501 and we’ll assess whether the second spring is worth keeping.
Can you replace my springs the same day?
Often, yes. Same-day service is possible in many cases when you call and the schedule allows, so it’s worth asking. Call (844) 484-7501. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to repair or replace the door when the springs go?
For springs alone, repair is almost always the right call: a spring replacement at $180 – $340 per spring is a fraction of a new door, which runs $700 – $2,200 installed. A new door makes sense only when the door itself is failing, not just the springs. Call (844) 484-7501 and we’ll give you a straight answer.
Will my homeowner’s insurance cover a broken spring?
Usually not. A worn spring is treated as normal wear and tear, which most policies don’t cover, so most spring replacements are paid out of pocket. If you’re unsure, check your policy, then call (844) 484-7501 for a free estimate and we can work with your insurer on the documentation side if needed.
Get Your Free Spring Replacement Estimate
If your garage door is heavy, crooked or letting out that bang, don’t wait for it to get worse. Call (844) 484-7501 for a free estimate on spring replacement in White Plains. We’re a multi-brand specialist: our technicians have up to 11 years of experience and work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor doors and openers. From the opener to the panel to the hardware, one call covers it all, and we handle spring work as a core specialty because it’s the most dangerous job on the door and the one most often botched. Same-day service is often possible, and we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the White Plains market as of 2026. Garage Door Repair White Plains offers free estimates – call (844) 484-7501.
Written by the team at Garage Door Repair White Plains.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Marcy Parker"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Destiny Dawson"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Craig Hayes