Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Repair for White Plains Homeowners
A garage door that won’t close leaves your car trapped and your house open. A snapped spring turns a routine morning into a scramble. We handle both, and everything between: springs, cables, tracks, rollers, panels, sensors, and openers. Our technicians have up to 11 years of experience, and they work on the eight major brands you’re most likely to own. Same-day service is available across White Plains, and we’re set up for emergency calls when a door failure can’t wait until tomorrow. Call (844) 484-7501 and we’ll get a technician moving. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday.
What Our Garage Door Repair Service Includes
Most garage door problems fall into six categories. Here’s what each one involves and how we approach it.
Panel Replacement
Panels take the brunt of daily use, and a dented or cracked section can throw the whole door out of balance. If one panel is bent after a bump from the car, or rust has worked through the bottom section, replacing that panel restores the look and keeps the door tracking straight. We match panel profiles and colors from Clopay, Amarr, Wayne Dalton, and other makers so the repair doesn’t stand out. A single panel swap usually runs $250 – $500, and we’ll tell you whether a section replacement makes sense or whether the door is far enough gone that a new one is the smarter spend.

Spring Repair
Springs are the most dangerous component in your garage door system, and we handle them right. Torsion and extension springs hold the full weight of the door under extreme tension, and when one breaks you’ll hear a loud bang and find the door too heavy to lift. This is not a job for a general handyman or a weekend project, and it’s the repair most often botched by people who guess. We replace torsion and extension springs as a core specialty, and a typical spring repair in White Plains runs $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that.

Cable Repair
The cables run from the bottom corners of the door up to the spring system, and they’re what keep the door level as it travels. A frayed or snapped cable usually shows up as a door that hangs crooked, jerks on the way down, or won’t lift at all. Cables are under the same tension as springs, so this is specialist work too. Cable repair here typically costs $130 – $250 depending on how much hardware has to come apart to reach the failure.

Track Realignment
The tracks guide the door up and down, and even a small bend throws the panels off their path. You’ll notice the door scraping, catching, or binding on one side, and left alone a misaligned track grinds the rollers and stresses the opener. We straighten or reset the track so the door travels clean and the rollers sit where they should. Track realignment usually runs $120 – $240, and it’s often the cheapest fix on the list when it’s caught early.
Roller Replacement
Rollers are small, cheap parts that make a big difference to how quiet and smooth the door feels. When they wear flat or the bearings seize, the door rumbles, shakes, and eventually starts jumping the track. Replacing a full set of rollers is one of the quickest jobs we do, and it’s worth doing before a worn roller damages the track. Roller replacement typically costs $110 – $220 depending on how many rollers and whether the hinges need attention while we’re in there.
Sensor Calibration
The safety sensors at the base of the door stop it from closing on a person, a pet, or a bike. When they’re knocked out of line, covered in grime, or the wiring has come loose, the door reverses for no obvious reason or refuses to close at all. We realign the lenses, check the wiring, and confirm the door reverses on contact the way it should. It’s a fast, precise adjustment, and it’s the first thing to check when your door mysteriously won’t shut.
Why homeowners call us for garage door repair in White Plains
One call covers the opener, the panels, and the hardware, so you never need a second company for a related issue. Our technicians have up to 11 years of experience, work on the eight leading brands, and diagnose by brand rather than guesswork. When a door needs more than your average repair, we can also help with garage door repair across the wider area.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Repair
We work on your brand, whichever one it is. Genie openers have their own logic-board quirks and remote-programming sequences, and we know them well enough to trace a fault without swapping parts blindly. Clopay and Amarr are two of the most common doors in White Plains homes, and we understand how their panel profiles and spring configurations wear over time. Whether it’s a Clopay panel that’s taken a hit or an Amarr door that’s started dragging, we’ve handled it.
Wayne Dalton doors and openers have their own hardware details that trip up technicians who haven’t worked on them before, and our crew knows where those systems wear out. We also service LiftMaster, Chamberlain, Craftsman, and Raynor equipment. Whether you have Genie, Clopay, Amarr, Wayne Dalton, or any other make, we can help, and we’ll tell you straight whether a repair is worth doing or whether a replacement makes more sense. For the full range of what we handle, see our garage door repair White Plains page.
Signs You Need Garage Door Repair Right Now
Garage doors rarely fail without warning. Here are the signals that mean it’s time to call.
- A loud bang from the garage. That sound is usually a spring snapping, and the door will suddenly be too heavy to lift by hand. Don’t force it, because a door running on a broken spring can drop or bend the tracks. This is the classic emergency call, and it’s one we handle.
- The door reverses or won’t close. When a door goes partway down and pops back up, the safety sensors or the opener’s travel limits are out of adjustment. It’s usually a quick sensor calibration, but it can also signal a failing opener. Either way, it leaves the house unsecured until it’s fixed.
- The door hangs crooked or scrapes. A door that’s higher on one side than the other points to a stretched cable or a bent track. Running it crooked wears the rollers and strains the opener, so it’s worth stopping before the damage spreads.
- Grinding, rattling, or squealing. Worn rollers and dry hinges make noise, and noise is the door telling you parts are wearing out. A roller replacement now is cheaper than a track repair later. If the noise comes from the opener itself, that’s a separate diagnostic.
- The door feels heavy or slams shut. A door that drops the last foot instead of easing down has lost spring tension or balance. That weight is dangerous to you and hard on the opener. It needs a proper adjustment, not more force.
Our Garage Door Repair Process – Step by Step
- 1
Call and describe the problem. We ask what the door is doing, what brand it is, and whether it’s stuck open or closed. That helps us send the right technician and the right parts on the first visit, so you’re not waiting on a second trip.
- 2
Full diagnosis on site. The technician checks the springs, cables, tracks, rollers, and opener, not just the obvious symptom. A door that won’t close might have a sensor problem and a worn roller at the same time, and we’d rather find both now. We use balance and tension checks to confirm what’s actually failing.
- 3
Written estimate before any work. You get the price in writing and we agree on it before a single part comes off. No surprise invoice at the end. If we find something extra once we’re in, we stop and talk it through before proceeding.
- 4
The repair itself. Springs, cables, and other high-tension parts are handled with the proper tools and safety procedures, because this is where shortcuts cause injuries. Panels, rollers, tracks, and sensors are fitted and aligned so the door runs true. We test the door through full open and close cycles before we call it done.
- 5
Final safety check and walkthrough. We confirm the safety reverse works, the door is balanced, and the opener’s force limits are set correctly. Then we show you what we did and what to watch for going forward. If a related issue is coming down the road, you’ll hear about it now, not after it fails.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in White Plains?
Garage door repair in White Plains typically runs $150 – $600 depending on what’s broken. A single spring repair is usually $180 – $340, and if both springs are replaced together that pair costs about twice the single-spring range. Cable repair runs $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, panel replacement $250 – $500, and opener repair $120 – $320. A new opener install is $250 – $550, and a full new door installation runs $700 – $2200. These are typical estimated ranges, and the written estimate sets the final price.
What moves the number: the brand and model of your door, how many parts have failed together, and whether the opener needs attention too. A snapped spring on a heavy double door with a worn cable is a bigger job than a single spring on a one-car door. The best way to avoid overpaying is to get a written estimate before work starts and to fix small problems before they spread. A worn roller is cheap; the track damage it causes is not.
A free estimate includes a full inspection of the door and opener, a clear diagnosis of what’s failing, and a written price for the repair. We quote per job. Call (844) 484-7501 for an exact quote, and estimates are free.
Garage Door Repair Near White Plains – Our Service Area
We cover White Plains and the towns around it, including Armonk, Chappaqua, Bedford Hills, Mount Kisco, Croton-on-Hudson, and Brookville. Response times depend on where you are and how busy the day is, but same-day service is often possible when you call early. If you’re in Armonk or Chappaqua, we can also help with garage door repair and garage door repair close to home. Call and we’ll tell you the soonest we can be there.
Serving White Plains, NY – Our Local Coverage Area
We serve White Plains and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Repair in White Plains
Garage door repair covers fixing the parts that make your door open, close, and stay secure: springs, cables, tracks, rollers, panels, sensors, and the opener itself. It’s different from installation, which is putting in a whole new door. Most repairs restore a door that’s still structurally sound, and that’s usually the cheaper path. We diagnose the actual failure rather than replacing parts until the problem goes away.
Most repairs finish in one visit, often within an hour or two. A spring or cable replacement is a focused job; a panel swap or roller set can be quicker. If the opener needs parts or the door requires a track rebuild, it may take longer or need a return visit once the parts arrive. We’ll give you a realistic time when we quote the job.
Most repairs land between $150 and $600, depending on the part and the door. Spring repair is typically $180 – $340 for one spring, cable repair $130 – $250, and track realignment $120 – $240. The written estimate sets the final price, and we agree on it before work starts. Call (844) 484-7501 for an exact quote – estimates are free.
Yes. We work on Genie, Clopay, Amarr, Wayne Dalton, LiftMaster, Chamberlain, Craftsman, and Raynor equipment. That means brand-specific diagnostics instead of trial-and-error, and the right parts the first time. If you’re not sure what brand you have, we can identify it on site.
Often, yes. Same-day service is available, and emergency calls are a real offering, not a promise we can’t keep. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Yes, our repairs are backed by a satisfaction guarantee. If something we fixed isn’t working as it should, call us and we’ll make it right. We’ll walk you through exactly what’s covered when we give you the estimate, so there are no surprises later. Call (844) 484-7501 with any questions.
Clear the area in front of and beneath the door so the technician has room to work. Make sure someone is home to let them in, and have your opener remote or keypad handy so we can test it. If the door is stuck open, leave it be rather than forcing it down. Tell us the brand and model if you know it, and we’ll be ready.
Schedule Your Garage Door Repair Service in White Plains Today
Don’t let a broken spring or a door that won’t close drag on. We diagnose by brand, quote in writing before we start, and get the door working again. Call (844) 484-7501 for a free, no-obligation estimate. We answer 24/7. Fast dispatch, 7am-7pm, Sunday through Friday. From the opener to the panel to the hardware, one call covers it all.
Written by the team at Garage Door Repair White Plains.